Footwear Basics

1,The length of the shoes for export is 8 centimeters, and the circumference of the shoes is 4 centimeters, and the length of the shoes for domestic sales is 6 centimeters, and the circumference of the shoes is 3.75 centimeters.

2, the inner and outer periphery of the human foot is not the same length, the inner short, the outer longer, so in the shoes if the face plate on the shoe decoration is symmetrical patterns on the left and right, then let the inner shoe decoration is shorter than the periphery of the shoe decoration of 2-3%, in the visual sense will feel symmetrical. In addition, the inner plate should be made wider and shorter, and the outer plate should be made longer and narrower, especially for the clip-on shoes.

3, make a good pair of shoes to use three kinds of glue, paste the midsole with powder glue, bonding faceplate and midsole with **** glue, sticking the outsole with heat-resistant glue and to the midsole and outsole double-sided brush glue.

4, sandals shoes exposed toes generally 4 half toes, the position of the thumb exposed *** joints and pinky only a little bit exposed *** for comfort!

5, sandals face version of the center line length (i.e., face version *** short place) about 4-4.5 centimeters *** for comfortable.

6,Toluene can erase the printing on the upper.

7,The height of sandals between the back strap at the heel and the midsole is 0.5-1 centimeters longer than the heel to the back strap bonded to the midsole. And the length from heel to where the back strap is bonded to the midsole is about 3.5-4 centimeters.

8,The height of the back strap of the sandal should be high inside and low outside, because the ankle joint is high inside and low outside.

9, The interface of the shoe's face plate under the midsole is generally about 2.2 centimeters.

10, The right foot is generally longer than the left foot's circumference and foot length.

E-mail:

sales@cnnaikai.com

Tel /WhatsApp: 

+86-13626896663